Environmental testing & monitoring
Environmental monitoring equipment hire
Calibrated environmental monitoring instruments for consultants, contractors, researchers, industries, academic institutions and government projects that need monitoring capacity for a defined period.
Buying specialist monitoring equipment rarely makes sense for a short project, a one-off survey or a research study. INRC hires out the same calibrated instruments our own team uses in the field, so you get reliable equipment without the cost of ownership.
Our range covers noise, vibration, air quality, gas detection and water quality. All instruments are regularly calibrated and maintained, and each one is checked before it leaves our office.
We don’t simply hand over a box. We set the instrument up with you, train the people who will use it, and stay available for troubleshooting during the hire. When the hire ends, we can help you download and organise the data.
Instruments available
Availability and hire rates on request. Each instrument is supplied calibrated.
DT-8852 sound level meter & data logger
Environmental and workplace noise surveys with data logging
Extech 407780 integrating sound level meter & data logger
Long-term noise surveys with Leq and SEL measurements and data logging
REED Instruments R8080 sound level meter
Spot noise measurements
Extech 407860 vibration meter
Vibration from machinery, construction and traffic
BRAMC 5-in-1 air quality monitor
PM2.5, PM10, formaldehyde (HCHO), TVOC and CO₂
Aeroqual S500 handheld multi-gas monitor
Ambient gas measurements with interchangeable sensor heads
Industrial Scientific MX6 iBrid multi-gas detector
H₂S, NO₂, SO₂, CO and combustible gases (pentane-calibrated)
Forensics Detectors FD-90E methane detector
Methane leak detection
Hanna HI9813-5 portable meter
pH, EC, TDS and temperature in water
Product images are the manufacturers’ and are shown for identification.
Support with every hire
- Equipment setup and handover
- Operator training
- Calibration support
- Troubleshooting assistance
- Data management guidance
Our process
How hiring works
- 1
Enquiry
Tell us what you need to measure, where, and for how long.
- 2
Availability & quote
We confirm the right instruments, their availability and the hire rate.
- 3
Pre-hire check
Each instrument is checked and calibrated before collection.
- 4
Handover & training
We set up the instrument with you and train the operators.
- 5
Support in the field
We are on hand for troubleshooting throughout the hire.
- 6
Return & data
On return we help download and organise your data.
What you receive
Clear, review-ready documents.
- Calibrated instrument with its accessories
- Calibration record
- Operating guidance
- Help with data download and organisation
Related services
Ready to get started?
Share your project details and we’ll respond with clear next steps.